MACH 2018 is just around the corner and Tornos has a real treat for turned parts manufacturers, giving a UK exhibition debut to the MultiSwiss 8X26. If you’re a turned parts manufacturer looking for something to give you a real competitive edge, you need to see the Tornos MultiSwiss 8X26 at MACH. This machine, one of a family of 3 ranging from 14 to 32mm spindle sizes will appear at the Birmingham NEC from the 9th to 13th April on Stand H19-312 alongside a number of new Tornos technologies.
Equipped with eight spindles and eight slides for main operations and accommodating up to three tools per slide, the MultiSwiss 8×26 takes the performance of the MultiSwiss range to a new level, both in terms of complexity and productivity. With eight highly dynamic synchronous motor-spindles and ultra-fast barrel indexing, the new MultiSwiss 8×26 can produce turned parts up to 26mm diameter at staggering productivity levels.
The new MultiSwiss 8X26 incorporates powerful independently operating 11kW motor-spindles that are equipped with a C-axis and counter spindle. Reaching speeds of 8,000rpm in tenths of a second, these advanced motors make a major contribution to performance and productivity. As an option, the machine can be equipped with Y axes to further boost its capabilities. However, the machine is available in three configurations to meet the demands of the end user. This includes the entry level option of working without a Y-axis; the option with three Y-axes for intermediate applications and the compete machine with six Y-axes for the most complex parts. In each machining position, the operator can tailor the speed and machining conditions as required.
As well as demonstrating the industry’s leading turning technology, Tornos will be giving MACH visitors a demonstration of its Industry 4.0-enabling TISIS process monitoring software. The Tornos stand is the place to get a first look at a state-of-the-art automated Tornos production cell to produce, clean, measure and sort machined parts and when necessary, communicate in-process corrections to each machine (closed loop monitoring). Visitors to Tornos’ stand will also experience TISIS live, with Tornos service engineers analysing the status of each connected Tornos machine at MACH 2018. TISIS machine communication and programming software is a manufacturers’ portal to the production efficiencies envisioned by Industry 4.0. Make sure you get a look at the future by visiting the Tornos stand at MACH 2018.
Tel: 01530 513100
Email: sales@tornos.co.uk
www.tornos.com
